Huatao group - Corrugator belt & spare partsweb: www.htwirebelt.com www(dot)htwirebelt.com email: [email] maple(at)huataogroup.com tel: 0086 133 8311 0583 whatsapp: 0086 133 8311 0583 product descriptioncassette type single facer provides convenient maintenance and provides quick flute change. the corrugating rolls changing can be accomplished within 10 minutes utilizing a motorized cassette trolley, by which cassette is delivered into the machine and fixed on the base of the machine.features1. maximum mechanical speed is 250m/min.2. the diameter of the corrugating rollers is 380 mm. the diameter of the pressure roller is 520 mm. the diameter of the surfaces of glue roller is 302 mm, the diameter of the doctor roller is 170mm.3. the machine adopts positive pressure air cushion paper guide, with high utilization of heat energy, and good quality of corrugated shaping.4. corrugated roller adopts positive pressure cassette type. it’s under the pressure roller, so as to lower the center of gravity of the machine. it’s smooth when under high-speed operation, and reduces vibration, so it’s more stable and smooth during operation. corrugated roller exchange is saver and faster.5. corrugated roller, pressure roller and glue roller adopts individual driving reduction box, to isolate vibration. the oil immersion lubrication and high precision gear driving ensure stable and reliable during operation.6. corrugated roller sets get in and out hydraulic automatically, so as to exchange different flutes rapidly.7. individual glue section could move out from the main machine, and it’s easy to clean and maintain. an electric glue partition device is provided to give convenient and rapid paper width adjustment. 8. the glue roller has low speed auto-rotate function, so as to avoid the glue dry on the glue roller.9. a frequency conversion motor is used to supply power, realizing stepless speed adjustment and reliable and synchronous interlock with the following devices. the frequency converter used is an international famous brand product with stable and reliable performance and low failure rate....
1. ball mill is a key equipment for further grinding after the primary crushing. the material evenly enters the first chamber of the grinder from the quill shaft in feeding device. the chamber is equipped with a ladder liner or ripple liner and steel balls in different specifications. centrifugal force caused by rotation of barrel brings the steel balls to a certain height and then falls down, which produces heavy impact and grinding effect on the material. materials after rough grinding in the first chamber shall enter into the second loaded with flat lining plate to go through further grinding, finally the ground materials are discharged by the discharging grate plate. ball mill is widely used in cement, silicate products, new building materials, wear-resistant materials, fertilizers, ferrous and non-ferrous metals, glass ceramics and other industries. according to the processing technology, it is divided into two grinding ways-the dry and the wet. besides,wet ball mill can be divided into tabular type and flowing type.tel:0086-371-5578880 email: ...
National University Science Park, West Third Ring Road, Zhengzhou, Henan, China National University Science Park, West Third Ring Road, Zhengzhou, Henan, China
MOROCCO YELLOW PAGESONLINE 
